home *** CD-ROM | disk | FTP | other *** search
- Path: hydra.unive.it!user
- From: Roberto FERRARA <ferrara@vega.unive.it>
- Newsgroups: comp.dcom.modems
- Subject: Re: USR Courier V.34 "NO DIAL TONE" error
- Date: Sat, 3 Feb 1996 6:18:07
- Organization: Ca' Foscari University (Venice)
- Message-ID: <2906116717ferrara@news.unive.it>
- References: <4eqmh6$7q@news.euro.net>
- NNTP-Posting-Host: 157.138.1.232
- X-To: F.Wiggers@inter.nl.net (Frans Wiggers)
- X-Newsreader: Marconi v2.0 Newsgroups Off-Line Reader
-
- In a message about 'Re: USR Courier V.34 "NO DIAL TONE" error',
- F.Wiggers@inter.nl.net (Frans Wiggers) wrote:
-
- >I recently bought an USR Courier V.34 modem.
- >
- >I bought it in the UK and I am trying to use it here in
- >the Netherlands. I can send AT commands, only the
- >modem refuses to connect to the line, giving an error
- >message "NO DIAL TONE".
- >
- >The phone line is OK. I am using the Dutch phone cable
- >with two RJ11 connectors. The UK cable will not fit
- >physically into the wall plug.
- >
- >Did I just do a stupid thing buying a modem in the UK
- >and using it in the Netherlands?
- >
- >Or might there still be some hope? Before starting debugging
- >and/or rewiring, etcetera. Is there anyone who has some
- >experience with these kind of matters?
- >
- >Do USR Courier modems destined for the UK, have special
- >hardware arrangements for the UK phone network?
-
- Try to chage the Xn command, try with:
-
- AT X1
- AT X2
- AT X3
- AT X4
- AT X5
- AT X6
- AT X7
-
- One of this command should works (first try X3 and X7).
-
- +--------------------------------------------------------------------+
- |Roberto FERRARA Via E. De Nicola, 418 |
- |E_Mail: ferrara@vega.unive.it I-30015 Chioggia (VE) |
- | I T A L Y |
- |This msg was sent by Marconi v2.0 the off-line reader for Internet |
- |newsgroups, by Roberto FERRARA. |
- +--------------------------------------------------------------------+
-
-